K&S Technologies LED Handlebar End Marker Light Kit - Black 15-1010

You looking to find the "K&S Technologies LED Handlebar End Marker Light Kit - Black 15-1010" Good news! You can purchase K&S Technologies LED Handlebar End Marker Light Kit - Black 15-1010 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $47.11    

Product Feature

• Mount in the ends of handlebars
• Wiring allows lights to perform in conjunction with turn signals
• Amber LEDs are bright and bring more attention to the bike
• Each kit includes: pair of LED handlebar end marker lights, Allen wrench, extra bullet wire terminals and covers (five male, five female), 45in of steel wire and installation instructions
• Specifications: head diameter 27mm, length of head 29mm, overall length 70mm

Product Description

Mount in the ends of handlebars
Wiring allows lights to perform in conjunction with turn signals
Amber LEDs are bright and bring more attention to the bike
Each kit includes: pair of LED handlebar end marker lights, Allen wrench, extra bullet wire terminals and covers (five male, five female), 45in of steel wire and installation instructions
Specifications: head diameter 27mm, length of head 29mm, overall length 70mm

K&S Technologies LED Handlebar End Marker Light Kit - Black 15-1010 Review

I bought these to replace the Oberon Bar End Signals that the previous owner had installed on my bike. I had just replaced the handlebar and broke them in the process, but I didn't want to pay to replace them when these were less than half the price. These look almost as good, and you can tell from the photos that they *should* be easier to install, because you don't have to actually run the wire through the nut that holds them on, like you do with the Oberons. In that respect, they are much better designed. K&S also generally has a pretty good reputation, and I hear they do a lot of OEM parts for most bikes, anyway. That's about where the good parts end, though.
Upon going to install them on the bike, I realized they don't fit the bars' inner diameter. They are made for 7/8in bars, according to K&S, but my bars have a smaller inner diameter than most 7/8 bars, apparently (2009 Buell 1125CR w/ 2010 handlebar kit). This meant that I had to slowly shave down the rubber stoppers on the end of the signals to get them to fit in the bars. Oberon avoids the same problem by having several metal adapters that you can choose from when you order your signals from them. The rubber re-shaping was actually probably harder than doing the wiring on the Oberons -- at least more tedious. Also, these lights are VERY dim during the day. Sure, they're "marker lights", but you'd be hard pressed to say they marked anything in daylight. At night, however, they're plenty bright. One other downside to these is that they don't hold bar-end mirrors like the Oberons do -- this meant cutting even more valuable real estate from the ends of my grips.
All in all, these are an okay buy if you really need them, have the proper size inner diameter on your bars, don't have mount points for "regular" turn signals, don't care about daytime visibility, and can't afford anything more expensive. If I could do it all over again, I'd suck it up and get the Oberon signals, but these will do until the next time I have to replace them.

Most of the consumer Reviews tell that the "K&S Technologies LED Handlebar End Marker Light Kit - Black 15-1010" are high quality item. You can read each testimony from consumers to find out cons and pros from K&S Technologies LED Handlebar End Marker Light Kit - Black 15-1010 ...